TORMAX 1201 Swing Door Drive

TORMAX 1201 Swing Door Drive

The TORMAX 1201 swing door drive, installed and maintained by ACE, is extremely capable for heavy and/or wide doors, and indeed where high wind shears are encountered.

TORMAX 1201 Swing Door Drive Overview

Exceptional access control automation from ACE Facilities

With its elegant, unobtrusive design, quiet operation as well as balanced and coordinated door movements, this swing door drive lends itself to almost every application in the interior of buildings.

The Tormax 1201 has a compact installation height of only 85 mm, and this offers limitless scope for door design using this swing door drive.

This swing door drive can be operated in three functionality modes:

Full Power – In the conventional full-power mode the drive provides its full force and can also move large, heavy doors. Sensors ensure a completely safe operation.

Low Energy – In the low-energy mode, the drive units can be operated without additional safety devices. This setting with reduced energy and gentle force immediately reacts when encountering any obstacle.

Power Assist – Using the power-assist function, users can open a door manually with very little force.

The drive assists the door movement by a very finely controlled and precise assisting force so as to ensure a natural movement. After passing through, the door closes safely by itself.

As highly experienced suppliers and installers of door automation, we have supplied / installed many Tormax 1201 swing door drives and have always been impressed by the performance they deliver.

Introduction to the TORMAX 1201 Swing Door Drive

Automation Made Easier

Areas of use

internal and external doors
Single and double-leaved pedestrian passageways in building entrances and interiors
Can be installed on all commercially available doors, whether in newbuilds or renovations
Recommended for door leaf widths up to 1400 mm and weights up to 250 Kg

Possible applications

Power Assist (power-assisted manual opening of doors)
Low Energy operation (limited power and speed; in certain circumstances the security systems can be omitted)
Full Power operation (with moving sensors) for doors with medium to high user frequencies
Fire and smoke protection doors (country-specific standards and regulations must be observed)
Escape routes and panic route opening (mechanical opening)
Air locks with two and three leaves
Barrier-free doors
Entrance doors subject to high wind loads up to 60 Km/h
Access doors to rooms with either positive or negative air pressure e.g. clean rooms

Advantages of the TORMAX 1201 Swing Door Drive

Let’s make life safer

Drive functionalities may be altered or supplemented by means of modules which can be retrofitted at any time
Flexible and economic solution thanks to upgrade and extension modules
Excellent quality of manufacture and a long working life
Network compatible (for instance for inclusion in access control or building management systems)
Integrated mechanical door closing function
Energy conservation function
Powerful motors
Quiet operation
Slender and compact aluminium design (H x D x L: 85 x 128 x 640 mm)
User interface can be integrated into the casing if required
Simple installation and commissioning
115 und 230 VAC operating voltage
EN 16005 (TüV), DIN 18650 (TüV) – 1 million test cycles at a rate of 4,000 cycles per day, UL 325, UL 228 fire door

Options

Stainless steel floor plates to cover the drive
Fixed wall box for the CENTER version
Different lever arm lengths – sliding rods for the CENTER version
Wind load brake (standard with OFFSET)
Various actuating elements and fuse sensors

We offer a range of sensors, contactless and touch-sensitive buttons and matching accessories, co-ordinated with our products, which excels through outstanding actuating performance, the highest degree of reliability and optimum safety.

Centurion-M Tripod Turnstile Specification Icons

Downloads and Specifications

ACE Facilities Ltd are experienced expert installers partners of the Record brand of automatic door products.

The C127 is part of the Record family of door products and you can learn more about the range on their website.

Furthermore, you can download our automatic door operator specification sheet.

Download the catalogue

ACE C127 Automatic Door Underfloor Operator

Specifications

Model	Centurion-M Rotary Tripod Turnstile
Crossing capacity in single access mode	25 person/min
Crossing capacity in free access mode, person/min	60
Passage width, mm	600
Mechanism	Motorised Triservo-M
Blocking mechanism	Two electromechanical stop catches (separate locking system)
Emergency mode (when power goes off)	Arm drops when power goes off
Drop arm function	Drop arm function can be activated when power is on. Drop arm function activates automatically when power goes off
Fail safe	Yes (drop arm)
Standard housing	Brushed SS AISI 304 (Indoor IP41)
Available housing	Brushed SS AISI 316 – Polished SS AISI 304 – Polished SS AISI 316 – Powder coated RAL
Tripod hub	Cast aluminum with grey painted finishing
Voltage	From the AC (100-240) V, 50/60Hz – from a DC source 12 V
Maximum power consumption	55 Watts
Enclosure rating	IP41 – IP54*
Unit dimensions (HxLxW), mm	1000 x 793 x 847
MCBF, cycles	1 500 000